Nuna mixx Instructions

EN
16
Accessories
Use with Nuna PIPA Infant Car Seat
When using with the Nuna PIPA infant car seat, please refer to the following
instructions.
1 To attach adapters, place adapters onto mounts as shown. A “click” sound
means the adapter is locked. (35)
2 To attach car seat, place car seat onto adapter as shown. (36), A “click”
sound means the car seat is locked. (37)
3 To remove car seat, lift the car seat upwards (38)-2 while pressing the
stroller release buttons. (38)-1
4 To remove adapters, lift the adapters upwards while pulling the release
buttons. (39)
! If you have any problems using the car seat,
please refer to the car seat instruction manual.
! Remove car seat before folding.
37
38
1
2
36
35
39
1
2

Nuna mixx Specifications

General

Weight Capacity	50 lbs
Wheel Type	All-terrain
Harness Type	5-point
Seat Orientation	Parent-facing, World-facing
Folded Length	36.5"
Folded Width	23.5 inches
Folded Height	16"
Seat Back Height	20 inches
Storage Basket	Yes
Compatible Car Seats	Nuna PIPA series
Suspension	All-wheel suspension
Canopy	UPF 50+ canopy with peek-a-boo window