Nuna Pepp Instructions

Accessories
Infant Car Seat Adapters
Only use Nuna infant car seat adapters with this
product.
Nuna PIPA series infant carriers can be used with PEPP next
using the included infant car seat adapters.
For PIPA series infant carrier assembly and usage, please
refer to the infant carrier instruction manual.
Before attaching the car seat adapters, remove the canopy
(p. 16).
1 - Unfasten the hook and loop from the side of the seat
frame.
2 - Pull and unsnap the fabric from the seat frame.
3 - Unlatch and open the infant car seat adapters, locating
the numbers on the inside.
4 - Place infant car seat adapter 1 around the left side of the
seat frame, with the arrow pointing down. The number
should be under the seat frame and the adapter should
align with the gray lines on the top of the seat frame.
5 - Close the infant car seat adapter over the top of the seat
frame.
6 - Pull the adapter end toward the seat frame. A “click”
sound means the car seat adapter is attached.
Repeat on the right side with infant car seat adapter 2.
click
1 4
5
6
2
3
22
PEPP next instructions
23
PEPP next instructions

Nuna Pepp Specifications

General

Type	Traditional stroller
Foldable	Yes
Fold style	Flat
Product color	Yellow
Number of seats	1 seat(s)
Maximum baby weight	18 kg
Minimum baby weight	- kg
Recommended age (min)	- month(s)
Number of front wheels	2
Wheels mobility	Swivel
Dimensions folded (WxDxH)	550 x 730 x 260 mm

Weight and Dimensions

Depth	840 mm
Width	550 mm
Height (max)	1050 mm
Height (min)	950 mm