11
EN
How to use the
Nuna buggy
Securing child
1 To release the buckle latch, push on center button and remove the clips. (2)
2 To secure child, assemble buckle. (3, 4, 5)
3 Fit harness snugly to child by sliding each adjustment buckle. (6)
Adjusting the shoulder harness position
1 In back of seat, turn adjustment buckle and push through the slot to
remove harness.
2 Reinsert harness into desired slots for comfortable fit. (7)
3 For children less than 6 months, the shoulder straps shall run through
the lowest shoulder slots. For children older than 6 months,
the shoulder straps can run through the two upper shoulder slots. (7)
Adjusting the push handle
1 Unlock by pulling back levers on both sides. (8)
2 Pull or push on handle to adjust to desired height.
3 Lock both levers by pushing forward.
To Next Page
Loading...
