1
2
3
4
Product Overview
Canopy
1 - To attach the canopy, snap the
canopy to the canopy mount on
both sides. To open the canopy,
pull the canopy toward the front
of the seat, and to close the
canopy, push it back.
2 - To remove the canopy, reverse
step 1. Then unsnap the seat
pad from the shell and lift fabric
up.
3 - Press the canopy release button
(1) and pull canopy through the
fabric slot (2).
Repeat on opposite side.
Shoulder Harness Pads
4 - Shoulder harness pads are
removable.
Buckle Holders
5 - Loosen and unfasten harness.
Place buckle tongues in buckle
holders.
1
2
5
PIPA lite r instructions 21PIPA lite r instructions20
To Next Page
Loading...
