Nuna PIPA LITE R User Manual

1
2
3
4
5
6
Product Use
Securing Child in
Child Restraint
1
- Loosen harness by pressing
the harness adjustment
button (1) while pulling on the
harness straps (2). The harness
adjustment button is located
inside the slot on the seat pad.
2 - Press chest clip button
to release the buckles (1).
Separate chest clip and spread
harness straps apart (2). Press
buckle button (3).
3 - Place buckle tongues into both
sides of the seat in the buckle
holders to make placing baby
more convenient.
4 - Place child in child restraint in
seated position.
5 - The child should be seated
against both the back and
bottom of the seat with no gap
behind the child. DO NOT allow
child to slouch.
Gently guide child’s arms through
harness loops.
6 - Insert buckle tongues into
buckle and listen for clicks. Pull
on buckle to verify it is latched.
1
3
2
2
1
2
30 PIPA lite r instructions PIPA lite r instructions 31

Nuna PIPA LITE R Specifications

General

Weight Capacity	4 to 32 lbs
Height Capacity	Up to 32 inches
Harness	5-point harness
Material	Aerospace aluminum
Safety Features	Side impact protection
Car Seat Base Included	No
Recline Positions	Multiple
Compatibility	Compatible with strollers