Nuna PIPA LITE R User Manual

1
2
3
1 - Snap the chest clip together and
temporarily slide down towards
buckle for tightening of harness.
2 - Tighten harness by pulling on
the harness adjustment strap.
Verify that the harness is snug around
the child’s waist and shoulders.
3 - Position the chest clip so it is at
child’s armpit level.
Harness straps must be at or just
below child’s shoulders to avoid
injury. If harness slots need to be
moved, see shoulder belts section.
Make sure that nothing interferes
with the harness. Make sure harness
is snug around child and lays flat.
If child is not secured properly,
child could be ejected in a
sudden stop or crash, resulting in
serious injury or death.
Check that Child is Secure
Buckle is fastened.
Harness straps are not twisted.
Harness is snug – A snug
harness cannot be pinched
horizontally, and should not allow
any slack.
Chest clip is level with armpits.
PIPA lite r instructions 33PIPA lite r instructions32

Nuna PIPA LITE R Specifications

General

Weight Capacity	4 to 32 lbs
Height Capacity	Up to 32 inches
Harness	5-point harness
Material	Aerospace aluminum
Safety Features	Side impact protection
Car Seat Base Included	No
Recline Positions	Multiple
Compatibility	Compatible with strollers