1 in.
1
2
3
4
5
1 - For a smaller child, use the
top shoulder harness loops (1)
and for a larger child, use the
bottom shoulder harness loops
(2).
2 - DO NOT allow harness to
pass over base attachment
bars.
3 - Top of child’s head is at least 1”
below top of child restraint.
Handle Adjustment
4 - The infant carrier handle can be
adjusted to 3 positions.
5 - To adjust the handle position,
squeeze handle adjustment
buttons on both sides (1).
Rotate handle until it clicks into
any of the 3 positions. Handle
can be used in vehicle in any
locked position (2).
Be sure handle is locked in the
carry position before lifting child
restraint by handle. An unlocked
handle could move unexpectedly,
causing injury to child. Handle
MUST NOT contact the vehicle
interior (side of car or seat in front)
when installed.
1
2
1
2
PIPA lite r instructions 29PIPA lite r instructions28
To Next Page
Loading...
