PIPA RELX
™
Base
Stability Leg (continued)
1
- If stability leg lifts base more
than 1 inch off the seat, adjust
as needed to close the gap.
DO NOT use stability leg to
recline the base. The recline
adjustment feature is meant to
recline the base.
2 - Always store stability leg when
not in use. Press adjustment
button to shorten stability leg,
then push leg into storage area.
Push until the release button
clicks into place.
The stability leg can be used or
stored for both rigid latch and
vehicle belt installation.
2
1
36 PIPA lite r instructions 37PIPA lite r instructions
To Next Page
Loading...
