Nuna Pipa Lite Series User Manual

Product Overview
Canopy
1 - To attach the canopy, snap the canopy to the
canopy mount on both sides. To open the
canopy, pull the canopy toward the front of the
seat, and to close the canopy, push it back.
2 - To remove the canopy, reverse step 1. Then
unsnap the seat pad from the shell and lift
fabric up.
3 - Press the canopy release button (1) and pull
canopy through the fabric slot (2).
Repeat on opposite side.
Dream Drape
™
Included on PIPA lite lx models.
4 - Unzip the zipper behind the front canopy bow.
5 - Pull the dream drape
™
out of the compartment.
Attach the dream drape
™
to the magnets on
each corner to the front of the carrier.
Shoulder Harness Pads
6 - Shoulder harness pads are removable.
Unfasten the hook and loop to remove the
shoulder harness pads.
1
2
1
2
3
4
5
6
17PIPA lite series instructions16 PIPA lite series instructions

Nuna Pipa Lite Series Specifications

General

Usage	4 to 32 lbs, up to 32 inches
Safety Features	Side impact protection
Base	Included
Material	Lightweight aerospace aluminum
Compatibility	Nuna strollers
Harness	5-point harness
Safety Standards	Meets or exceeds FMVSS 213
Weight	5.3 lbs