Nuna Pipa Lite Series User Manual

This child restraint MUST be installed in a
vehicle with the base.
The following vehicle belts CAN NOT BE USED
with your child restraint:
1 - Motorized Belts (Automatic)
These should not be used unless the shoulder
belt can be removed, the lap belt is locked and
use is allowed by the vehicle manufacturer.
2 - Dual Retractor Lap/Shoulder Belts
If allowed by the manufacturer, the lap belt only
may be used to secure the child restraint in
accordance with this manual and the vehicle’s
manual.
3 - Non-Locking (ELR) Lap Belts
This belt locks in a crash or sudden stop and
should only be used with a belt shortening clip.
Contact your vehicle manufacturer if needed.
4 - Airbag/Inflatable Belts
This belt can not be used to install this child
restraint.
5 - Door Mounted Belts
This belt can not be used to install this child
restraint.
6 - Lap Belts forward of Seat Bight
This belt (where the seat bottom and back
meet) should not be used to install this child
restraint.
1
2
3
4
5
6
11PIPA lite series instructions10 PIPA lite series instructions

Nuna Pipa Lite Series Specifications

General

Usage	4 to 32 lbs, up to 32 inches
Safety Features	Side impact protection
Base	Included
Material	Lightweight aerospace aluminum
Compatibility	Nuna strollers
Harness	5-point harness
Safety Standards	Meets or exceeds FMVSS 213
Weight	5.3 lbs