Nuna pipa Series User Manual

EN
20 PIPA instructions
Changing Harness Position
Shoulder Belts
1 - With child placed in infant child restraint,
identify harness slots at or just below shoulder
level.
2 - With child removed, loosen harness.
3 - Turn carrier over and remove one harness loop
from metal splitter plate.
4 - Pull loose end of harness loop out through slot
and place in correct slot.
5 - Re-attach to splitter plate.

Nuna pipa Series Specifications

General

Product Type	Infant Car Seat
Height Capacity	Up to 32 inches
Weight Capacity	4-32 lbs
Safety Features	Side Impact Protection (SIP)
Material	fabric
Compatibility	Fits most strollers with adapters
Harness	5-point harness
FAA approved	Yes