Nuna pipa Series User Manual

EN
24 PIPA instructions
Securing Child in Carrier
1 - Loosen harness by pressing on adjuster button
while pulling on the harness straps.
2 - Press button to release the buckles. Separate
chest clip and spread harness straps apart.
3 - Place child in carrier in seated position, resting
the child against both the back and bottom of
the seat.
4 - Gently guide child’s arms through harness
loops. Insert buckle tongues into buckle. Listen
for clicks. Pull on buckle to verify it is latched.
5 - Snap the chest clip together and temporarily
slide towards buckle for tightening of harness.

Nuna pipa Series Specifications

General

Product Type	Infant Car Seat
Height Capacity	Up to 32 inches
Weight Capacity	4-32 lbs
Safety Features	Side Impact Protection (SIP)
Material	fabric
Compatibility	Fits most strollers with adapters
Harness	5-point harness
FAA approved	Yes