EN
40 PIPA instructions
Installation in an Aircraft
Position carrier so that child is facing the aircraft
seat.
1 - Route the aircraft lap belt under both lap belt
guides and buckle.
Adjust the angle of the carrier. A rolled up towel or
foam pool noodle may be used to help adjust the
amount of recline. (Page 34) The angle is correct
when the blue line is level with the floor of the
aircraft.
Tighten the aircraft belt while pushing the carrier
firmly into the seat.
When installing in an airplane using a base, follow
the instructions for vehicle installation with a base
using lap belt only. (Page 30)
This Infant child restraint is certified for use in
commercial aircraft with or without the base. Be
sure to contact your airline prior to travel to discuss
their Infant child restraint policy.
Installation on a Stroller
The Nuna PIPA infant child restraint can attach
to Nuna strollers using adapters. Instructions
are included with the adapters, which are sold
separately.
The Nuna PIPA can also attach to other brands of
strollers using adapters. Please visit nunababy.ca
for more information.
To Next Page
Loading...
Need help?
General
