Nuna Pipa User Manual

22
Stability Leg
• Do not use over vehicle floor storage compartment.
• Do not use if stability leg lifts base off seat.
Do not use stability leg to
recline the base. The recline
adjustment feature is meant
to recline the base.
• Always store stability leg when not
in use.
1 Unfold the stability leg from storage compartment.
2 After correctly installing the base on the
vehicle seat, squeeze adjustment button
to extend the stability leg to floor.
• Stability leg must be vertical.
• The stability leg has 12 positions.
When the stability leg indicator shows red
this means the stability leg is in the wrong
position. Make sure the stability leg is secure
by pressing down on the front of the base.
The stability leg indicator shows green when
it is vertical and properly contacting the floor
of the vehicle.
2
1

Nuna Pipa Specifications

General

Product color	Red
Car seat group	0+ (0 - 13 kg; 0 - 15 months)
Side protection	Yes

Weight and Dimensions

Depth	700 mm
Width	435 mm
Height	530 mm
Weight	3950 g