Nuna Pipa User Manual

24
5 Adjust the angle of the carrier. A rolled up towel or foam pool
noodle may be used to help adjust the amount of recline.
Angle is correct when blue line on carrier is level with ground.
6 Tighten vehicle belt while
pushing carrier firmly into
vehicle seat. Lock the vehicle
belt. Refer to vehicle owner's
manual for instructions. If you
cannot lock the vehicle belt,
you must use the provided
locking clip (Page 25)
• Refer to your vehicle owner’s manual
to determine if shoulder belt will lock.
• If necessary, connect the shoulder and lap belts with a
locking clip.
• Tension the vehicle safety belt as much as possible,
checking that it is not loose or twisted.
7 This belt MUST be locked to prevent movement of the lap
portion of the belt. Reveiw the following points for the use of
a Locking Clip

Nuna Pipa Specifications

General

Product color	Red
Car seat group	0+ (0 - 13 kg; 0 - 15 months)
Side protection	Yes

Weight and Dimensions

Depth	700 mm
Width	435 mm
Height	530 mm
Weight	3950 g