Need help?Do you have a question about the Nuova Simonelli APPIA LIFE and is the answer not in the manual?
General| Model | Appia Life |
|---|---|
| Category | Coffee Maker |
| Groups | 1, 2, or 3 |
| Boiler Material | Copper |
| Boiler | Yes |
| Boiler Capacity (1 Group) | 5 liters |
| Boiler Capacity (2 Group) | 11 liters |
| Boiler Capacity (3 Group) | 15 liters |
| Power (2 Group) | 3000 W |
| Voltage | 220-240V |
| Dimensions (2 Group) | 78 x 53 x 53 cm |
| Weight (2 Group) | 60 kg |
| Material | Stainless Steel |
| Steam Wands | 2 |
| Hot Water Tap | Yes |
| Pump Pressure | 9 bar |
| Type | Espresso Machine |
| Water Connection | Direct |
| Features | Soft Infusion System |
| Pump | Rotary |
Steps for site preparation and electrical requirements before installation.
Guidelines for transporting and handling the machine safely.
Information about the manufacturer, address, and coffee machine model.
Diagram identifying machine parts and their corresponding labels for reference.
Detailed list of machine components and descriptions of button functions.
Specifies the intended purpose and professional use of the coffee machine.
Lists situations of incorrect or unsafe operation of the machine.
Guidelines for placing the machine considering size, weight, and ventilation.
Instructions for connecting water supply and required water quality specifications.
Guidance on connecting the machine to the electrical mains and required specifications.
Steps to perform after installation, including machine activation and initial dispensing.
Instructions for adjusting the hot water temperature using the economiser.
Description of the automatic boiler water filling process and initial water replacement.
Procedures for adjusting pump pressure and boiler service pressure.
Instructions for personalizing button panel cards during replacement.
Procedure for turning the machine on and off, including self-diagnostic indications.
Steps for preparing and dispensing coffee, including filter handling and purging.
Instructions for using the steam wand, including safety and purging.
Steps for preparing cappuccino using the steam wand and milk.
Procedure for dispensing hot water, including safety and purging.
Using the automatic steam wand for foaming milk or heating liquids.
Procedure for entering dose programming mode for each group.
Steps to program coffee dose amounts for each delivery key.
Procedure for programming hot water dispensing amount and time.
Programming options for the cup warmer's automatic switch-on and off times.
Setting pre-determined values for group doses and water/steam dispensing.
How to copy dose settings from group 1 to groups 2 or 3.
Accessing and adjusting machine operating parameters like pump activation and keypad brightness.
Steps to enter and perform the automatic cleaning cycle for the machine groups.
Instructions for cleaning the work area and the machine's external casing.
Weekly procedure for cleaning the shower heads and checking for blockages.
Procedure for automatic cleaning of the group using specific washing powder.
Steps for cleaning filters and filter-holders using cleanser and soaking.
Procedure for regularly regenerating water softener resins to maintain efficiency.
Table detailing machine messages, causes, effects, solutions, and notes for troubleshooting.
Schematic diagram illustrating the machine's electrical wiring and components.
Detailed electrical diagram for 2 and 3 group machine configurations.
Electrical diagram for Version V, 2/3 group machines.
Schematic diagram showing the machine's hydraulic system and water connections.
Diagram of the boiler assembly for 2-group machines, including part numbers.
Diagram of the boiler assembly for 3-group machines, including part numbers.
List of CE directives and harmonized standards applicable to the machine.
To Next Page