To Next PageTo Next PageWhy my Nuova Simonelli Oscar II does not switch on?
If your Nuova Simonelli Coffee Maker isn't switching on and the power light is off, it means the machine isn't receiving power. First, ensure the machine is properly connected to the electrical mains. If it is, check the socket by plugging in another device. If the socket is not working, try a different socket to rule out power supply issues.
What to do if Nuova Simonelli Coffee Maker does not switch on?
If your Nuova Simonelli Coffee Maker isn't switching on and the keyboard is completely off, first, make sure the machine is properly connected to the electrical mains. Check if the socket reset switch has tripped by testing the socket with another device. If there's no electrical voltage in the socket, try plugging the machine into another socket.
How to fix not hot enough coffee from Nuova Simonelli Oscar II?
If your coffee is not hot enough when using your Nuova Simonelli Coffee Maker, make sure the filter holder is preheated by leaving it in the machine during heating. Preheat your cups on the cup holder. Ensure the machine has warmed up fully by waiting for the resistance light to turn off. Check that the coffee is pressed correctly. If none of these steps help, the heater safety thermo fuse may have tripped, requiring machine replacement.
What to do if my Nuova Simonelli Oscar II Coffee Maker does not fill with water?
If your Nuova Simonelli Coffee Maker isn't filling with water, check if the stop valve at the bottom of the tank is blocked. Try moving it with a sharp object to dislodge any blockage. If the pump tank connection pipe is empty, try quickly inserting and removing the tank several times to help the pump draw water.
What to do if my Nuova Simonelli Oscar II does not prepare espresso coffee?
If your Nuova Simonelli Coffee Maker is not preparing espresso, several factors could be at play. Ensure the machine is powered on and that the water tank is correctly positioned and filled. If the coffee seems too fine or overly pressed, adjust the grind or reduce the dose. Also, check for any blockages in the sprayhead or filter holder and clean them if necessary. If little to no water comes out during dispensing without coffee, perform a complete descaling and consider using lighter water. If you've recently descaled, try opening and closing the coffee valve repeatedly to dislodge any limescale residues.
Why is my Nuova Simonelli Oscar II Coffee Maker dispensing coffee abnormally?
If your Nuova Simonelli Coffee Maker is dispensing coffee abnormally (e.g., it's running/dripping, the cream isn't compact, or it's bubbly), start by cleaning the sprayheads with a blind filter and disassembling the filter holders for thorough cleaning. Verify that you're using the correct filter for your dose—a shallower single filter for a single dose and a deeper double filter for a double dose. Ensure the coffee is pressed properly and is fresh. If you hear the pump starting but only get drips, perform a complete descaling and consider using lighter water.
What to do if the water light is on in my Nuova Simonelli Coffee Maker?
If the water light is on your Nuova Simonelli Coffee Maker, it could mean the tank needs water. If the tank is full but the light persists, ensure the tank is properly fitted. Also, check for limescale buildup that might be preventing the sensor from floating correctly; if the inside of the tank feels rough, clean it thoroughly and consider using lighter water.
Why is my Nuova Simonelli Coffee Maker leaking water during dispensing?
If your Nuova Simonelli Coffee Maker is leaking water from the unit during dispensing, clean the gasket area and the filter holder with a cloth. Also, ensure the filter is correctly positioned inside the filter holder and reposition if necessary.
How to fix coffee not hot enough in Nuova Simonelli Oscar II Coffee Maker?
If the coffee from your Nuova Simonelli Coffee Maker isn't hot enough, ensure the filter holder is preheated by leaving it in the machine during heating. Preheat your cups on the cup holder. Allow the machine to warm up fully until the resistance light goes out. Ensure the coffee is pressed correctly. Note that if the heater safety thermo fuse has tripped, machine replacement is necessary.
Why is the water light on my Nuova Simonelli Oscar II?
If the water light is illuminated on your Nuova Simonelli Coffee Maker, first, add water to the tank. If the tank is full but the light persists, ensure the tank is correctly fitted. Also, check for limescale buildup that may be preventing the sensor from floating properly; clean the water container and consider using lighter water.
General| Boiler Type | Heat Exchange |
|---|---|
| Boiler Material | Copper |
| Water Reservoir Capacity | 2.3 liters |
| Dimensions | 300 x 400 x 410 mm |
| Weight | 13 kg |
| Power | 1200 W |
| Voltage | 110-120V or 220-240V |
| Material | Stainless Steel |
| Type | Semi-Automatic Espresso Machine |
| Boiler Size | 2 liters |
| Water Tank Capacity | 2.3 liters |
| Portafilter | 58 mm |
| Pump Pressure | 15 bar |
| Pump Type | Vibratory pump |
| Body Material | Stainless Steel |
Guide to safely installing the machine, including electrical and plumbing requirements.
Safety precautions to be observed during cleaning and maintenance operations.
Instructions for proper and safe operation of the appliance.
Information and procedures for the environmentally sound disposal of the unit.
Procedures and precautions for safe transport and handling of the machine.
Lists all accessories and parts included with the Oscar II machine.
Description of the machine's electronic control components and their functions.
Steps to prepare filter holders and filters for use.
Instructions for setting up the machine with the water tank.
Instructions for setting up the machine via direct water connection.
Guide to initial machine startup and filling the heating system.
Explanation of buttons, indicators, and their functions on the control panel.
Step-by-step guide to programming coffee dispensing volumes.
Instructions on how to dispense espresso coffee correctly.
Instructions for dispensing steam for milk frothing and heating liquids.
How to put the machine into energy-saving standby mode.
Procedure for turning off the machine completely.
Covers general cleaning, specific part cleaning, and descaling procedures.
