ENGLISH
Table 3
1
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m) can be estimated using the
equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to the
transmitter manufacturer.
NOTE 1: At 80 MHz and 800 MHz, the separate distance for the higher frequency range applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption reflection from structures, objects, and people.
ELECTROMAGNETIC COMPATIBILITY (EMC) TABLE
24
Guidance and manufacturer’s declaration – electromagnetic immunity
0.01
0.1
1
10
100
0.12
0.36
1.2
3.8
12
0.12
0.36
1.2
3.8
12
0.23
0.73
2.3
7.3
23
Rated maximum output
power of transmitter
1
W
800 MHz to 2.5GHz
d = 2.3 √P
80MHz to 800 MHz
d = 1.2 √P
150 kHz to 80 MHz
d = 1.2 √P
Separation distance according to frequency of transmitter
To Next Page
Loading...