1.
Connect blender
base to power.
2.
Place bowl
on base and
turn clockwise
to lock in place.
3.
Holding the
Quad Blade
Assembly by
the top of the
shaft, insert it
into the bowl.
4.
Fill bowl with
desired contents,
then place the lid
on the bowl and
turn clockwise
to lock in place.
NUTRI NINJA
®
NUTRI BOWL
™
DUO
™
WITH AUTO-IQ
™
TOTAL BOOST
™
QUICK ASSEMBLY
Please make sure to read the enclosed Ninja Owner’s Guide prior to using your unit.
NN100 SERIES
1.
Connect blender
base to power.
2.
Fill cup with desired
contents and screw
on Pro Extractor
Blades
®
Assembly
clockwise until you
have a tight seal.
3.
Flip cup upside
down and lower
it onto base.
4.
Turn cup clockwise
to lock in place.
Display will read “--” once base is properly connected to power source.
Display will read “--” once base is properly connected to power source.
NUTRI BOWL™
NUTRI NINJA
®
CUPS
WARNING: Handle the Pro Extractor Blades
®
Assembly with care, as the blades are sharp.
WARNING: Quad Blade Assembly is sharp and not locked in place. Before pouring, carefully
remove blade assembly. Failure to do so will result in a risk of laceration. Refer to the Ninja
Owner’s Guide for additional information.
QUESTIONS? We’re here to help. Call 1-877-646-5288 or visit ninjakitchen.com
SEE REVERSE SIDE TO LEARN MORE ABOUT AUTO-IQ AND TOTAL BOOST.
To Next Page
Need help?
General
