NUTRIBULLET JUICER PRO - Disassembly Continued; Step 5: Food Pusher Removal; Step 6: Basin Cover Cleaning; Step 7: Sieve Removal and Cleaning

23
5 Remove the Food Pusher by
lifting it out of the feed chute.
6 Lift the Basin Cover
vertically o of the Pulp
Basin and remove any pulp
from the inside of the cover.
You may use the flat end
of the Cleaning Brush to
scrape pulp o of the cover.
7 Gently lift the Sieve
vertically out of the center
of the Pulp Basin. Clean
the Sieve right away (see
care instructions).
8 Empty the Pulp Basin. Use
the flat end of the Cleaning
Brush to easily scrape out the
pulp and set it aside for use in
other recipes or composting.
Or empty the pulp into your
waste bin or compost.