22
Disassembly.
1 Ensure the unit is powered
“OFF” and unplugged.
2 Remove the pitcher from
under the spout. To prevent
drips use the No-Drip Spout
cover to close the juice spout.
3 Unlock the Locking Handle
from the Basin Cover by
pulling the handle backward
out of the “ears” on either
side of the Basin Cover.
Move the handle down.
4 Remove the Pulp Basin
from the Motor Base by
pulling upwards with the
Basin Cover and Sieve still
in place, and take it directly
to your sink.
To Next Page
Loading...
