NUTRIBULLET JUICER PRO

Need help?

Do you have a question about the NUTRIBULLET JUICER PRO and is the answer not in the manual?

Summary

Important Safeguards

General Safety Information

Essential safety precautions for operating the juicer, covering user suitability, electrical safety, and cord handling.

Avoid Contact with Moving Parts

Warning about the dangers of moving parts and the importance of keeping hands and objects clear during operation.

Additional Safeguards

Plug Modification and Safety

Information on the polarized plug and advice on modification to avoid electric shock risks.

Packaging and Blade Handling

Instructions on removing packaging, child safety, and extreme caution when handling sharp blades.

Assembly & Use Steps 1-4

Step 1: Motor Base Placement

Placing the Motor Base on a dry, level counter top with the dial set to 'OFF' and unit unplugged.

Step 2: Pulp Basin Alignment

Placing the Pulp Basin on the Motor Base, aligning the spout with the dimpled side.

Step 3: Sieve Installation

Aligning and pushing the Sieve into the motor drive coupling until it clicks, ensuring it's seated securely.

Step 4: Basin Cover Placement

Placing the Basin Cover over the Sieve and Pulp Basin, aligning its 'ears' with the Pulp Basin's 'ears'.

Assembly & Use Steps 5-8

Step 5: Locking Handle Operation

Raising and locking the handle into the Basin Cover's 'ears' for the juicer to power on.

Step 6: No-Drip Spout Adjustment

Swinging the No-Drip Spout cover up vertically, away from the juice spout.

Step 7: Juice Pitcher Lid Placement

Step 8: Juice Pitcher Positioning

Usage Instructions Steps 1-2

Step 1: Ingredient Preparation

Step 2: Power Connection

Usage Instructions Steps 3-4

Step 3: Speed Selection and Juicing

Selecting a speed to begin juicing, with the option to toggle speeds based on produce type.

Step 4: Dual-Size Food Pusher Operation

How to grip, twist, and unlock the inner pusher of the Dual-Size Food Pusher for use.

Usage Instructions Steps 5-6

Step 5: Using Narrow Chute

Step 6: Using Wide Chute

Usage Instructions Step 7

Step 7: Juicing and Pulp Separation

Observing juice flow, pulp separation, and adhering to warnings about chute usage.

Usage Instructions Steps 8-11

Control Panel and Juicing Settings

Disassembly

Step 1: Power Off and Unplug

Step 2: Spout Cover Use

Step 3: Locking Handle Unlock

Step 4: Pulp Basin Removal

Disassembly Continued

Step 5: Food Pusher Removal

Step 6: Basin Cover Cleaning

Step 7: Sieve Removal and Cleaning

Step 8: Pulp Basin Emptying

Care & Maintenance

Cleaning the Juicer Components

Ensuring the motor base is unplugged, rinsing parts, and using the cleaning brush for the sieve.

Dishwasher Safety

Motor Base Cleaning

Troubleshooting Guide

Power Flashes Three Times

Problem: Unit not properly assembled. Solution: Ensure pulp basin and locking handle are secure.

Juicer Stopped, Power Flashed

Problem: Juicer stopped mid-use with power flash. Solution: Ensure locking handle is securely locked.

Juicer Stopped, Power Illuminated

Problem: Juicer stopped, power illuminated. Solution: Unit exceeded 10 mins run time; cool down for 15 mins.

Juicer Stopped, All Lights Flashed

Problem: Juicer stopped, all lights flashed. Solution: Unit overheated; cool down for 15 mins.

One-Year Limited Warranty

Warranty Obligations

Obtaining Warranty Service