12
5 Raise the Locking Handle
and move it into the "ears" on
each side of the Basin Cover.
The Locking Handle should
be in a vertical position and
locked into place.
NOTE: if the Locking Handle is not
securely in place, the juicer will
not power on.
6 Swing the No-Drip Spout
cover up vertically, so that
it is no longer covering the
juice spout.
7 Place the Juice Pitcher
Lid on top of the Juice
Pitcher and open the
locking lid latch.
8 Slightly angle the Juice
Pitcher and place it under
the juice spout. Align the
spout with the hole in the
Juice Pitcher Lid and level
out the Juice Pitcher It will
fi t snuggly into the spout to
hold it in place.
NBJ07100_NB-Juicer_UG_(AUS)_F200821.indd 12 8/21/20 2:45 PM
To Next Page
Loading...
