25
Replacement parts.
To order additional parts and accessories, please visit our website
at bulletbrands.com.au / bulletbrands.co.nz.
1 PROBLEM: The power
button flashes three
times and then remains
illuminated when I select
a speed.
SOLUTION: This means
that the unit is not properly
assembled. Ensure the Pulp
Basin is properly seated
on top of the Motor Base,
and the Locking Handle
is locked into place.
2 PROBLEM: The juicer
stopped in the middle of
juicing, and the power
button flashed.
SOLUTION: Ensure the
Locking Handle is securely
locked into place.
Troubleshooting guide.
3 PROBLEM: The juicer
stopped in the middle of
juicing, and the power
button remains illuminated.
SOLUTION: You have
exceeded 10 minutes of
continuous running time.
Unplug the juicer and keep
the unit o for 15 minutes
before continuing use.
4 PROBLEM: The juicer has
stopped running, and all
lights flashed three times.
SOLUTION: The juicer has
overheated. Unplug the
unit and allow it to cool
down for 15 minutes
before continuing use.
NBJ07100_NB-Juicer_UG_(AUS)_F200821.indd 25 8/21/20 2:45 PM
To Next Page
Loading...
