Assembly guide.
nutribullet
®
cup
extractor blade
motor base
CAUTION: Do not run the
Motor Base in excess of 1
minute per interval. Do not
run the Motor Base for more
than three 1-minute intervals
without allowing it to cool
for 2-3 minutes after the
third extraction. Running the
motor for more than 1 minute
consecutively in any interval
may warm the ingredients and
pressurize the nutribullet
®
Cup.
Friction from the rotating
Extractor Blade when
extracting can cause
ingredients to heat and
generate internal pressure in
the sealed vessel. If the vessel
is warm to touch, allow to
cool before carefully opening
pointed away from your body.
Place the Extractor
Blade onto the
nutribullet
®
Cup
and twist until it is
tightly sealed.
Turn the nutribullet
®
Cup upside down and
place it onto the Motor
Base. Gently push and
twist, 60-second auto
blending cycle will be
activated. The blue
light and unit will shut
o once auto-mode
is completed.
Unlock the
assembly by gently
pushing and
untwisting the cup
counterclockwise.
Once the Extractor
Blade stops
completely, remove
the nutribullet
®
Cup from the
Motor Base. Enjoy!
Add ingredients* to
the nutribullet
®
Cup.
1
54
2
3
SEE USER GUIDE FOR DETAILED
ASSEMBLY INSTRUCTIONS
nutribullet
®
cup
assembly.
10
11
PULSE
To Next Page
Loading...
