Need help?Do you have a question about the nuud LIFEPROOF and is the answer not in the manual?
General| Brand | nuud |
|---|---|
| Model | LIFEPROOF |
| Category | Cell Phone |
| Language | English |
Submerge the assembled case in water for 30 minutes.
Remove case from water, dry it, and check for internal moisture.
Remove screen protectors and clean iPad and case before installation.
Insert the iPad, starting with the top, into the back of the case.
Slide front case hooks under iPad and snap the case together.
Close the charge port door and screw the headphone jack cover fully.
Open the charge port door and use a coin to separate the case.
Carefully pull the two halves of the case apart.
Lift the iPad out of the case at a slight angle.
Test case every three months and before water exposure.
Inspect for damage after impacts; reseal and re-test before water exposure.
To Next Page