Need help?Do you have a question about the NUVE NF 048 and is the answer not in the manual?
General| Model | NF 048 |
|---|---|
| Volume | 48 liters |
| Temperature Fluctuation at 37°C | ±0.3 °C |
| Shelves | 2 |
| Internal Material | Stainless Steel |
| Internal Dimensions (HxWxD) | 400x400x300 mm |
| Type | Incubator |
Describes the primary applications and capabilities of the NF 048 centrifuge in laboratory settings.
Details key performance parameters, dimensions, power, and capacity of the centrifuge.
Lists available optional accessories, including rotors and adaptors, with corresponding part numbers.
Outlines essential safety warnings, prohibited uses, and operational limitations for safe operation.
Explains warning symbols and covers lifting, transport, unpacking, and positioning procedures.
Specifies voltage, frequency, and grounding requirements for connecting the centrifuge to the power supply.
Guides on powering on, using the control panel, and understanding its display and indicators.
Details how to set programs, select parameters, and operate the pulse mode for specific runs.
Explains the lid locking system and the procedure for manual lid opening in emergencies.
Explains how to prepare the rotor and load samples correctly for balanced operation.
Describes the drive system and outlines procedures for periodic cleaning and maintenance.
Details approved sterilization methods and discusses factors causing corrosion.
Provides guidance on the proper disposal of the centrifuge and its components according to regulations.
Lists common operational problems, their solutions, and explanations of error codes.
Presents the electrical schematics for the centrifuge's internal components.
Illustrates and explains various safety warning labels found on the centrifuge.
To Next Page
