EasyManua.ls Logo

NUVE NF 1200 User Manual

NUVE NF 1200
23 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
0
NÜVE SANAMALZEMELERİ İMALAT VE TİCARET A.Ş.
NF 1200 / 1200 R
MULTI-PURPOSE BENCH
TOP CENTRIFUGES
USER’S MANUAL
Z14. K25 249 Rev. No: 07 Rev.Date: 01/2016
Question and Answer IconNeed help?

Do you have a question about the NUVE NF 1200 and is the answer not in the manual?

NUVE NF 1200 Specifications

General IconGeneral
CategoryLaboratory Equipment
Frequency50/60 Hz
TypeFreezer
Temperature ControlDigital
DisplayDigital
Voltage220-240V

Summary

SECTION 1 INTRODUCTION

1.1 USE AND FUNCTION

Explains the purpose and function of the centrifuges and their components.

SECTION 2 TECHNICAL SPECIFICATIONS

2.1 TECHNICAL SPECIFICATIONS TABLE

Provides a detailed table of technical specifications for the NF 1200/1200R models.

2.2 ACCESSORIES FOR NF 1200/1200R

Lists available accessories, such as rotors and buckets, for the centrifuges.

2.3 GENERAL PRESENTATION

Offers a general overview and presentation of the centrifuge unit.

2.4 ROTOR SELECTION TABLE

Presents a table detailing different rotors and their capacities for selection.

2.5 PRECAUTIONS AND USAGE LIMITATIONS

Details important safety precautions and operational limitations for users.

SECTION 3 SYMBOLS

SECTION 4 OPERATING UNIT

4.1. OPERATING

Guides the user through the basic steps for operating the centrifuge.

4.2. DISPLAYS AND CONTROL PANEL

Explains the components and functions of the control panel, including speed, time, and temperature displays.

4.3. MAKING A NEW PROGRAM

Guides the user on how to create and save new operational programs.

4.4. RUNNING THE PROGRAM

Provides detailed steps on how to run the centrifuge program.

4.4.1. SELECTING THE MEMORIZED PROGRAM

Explains how to select and run a previously saved program.

4.5. SAFETY INTERLOCK SYSTEM

Describes the safety features that prevent operation when the lid is open or rotor is spinning.

4.6. IMBALANCE DETECTION SYSTEM

Explains how the imbalance detection system works and error codes.

4.7. MANUAL LID OPENING

Details the procedure for manually opening the lid in case of power failure or breakdown.

SECTION 5 OPERATING PRINCIPLES

5.1. PREPARATION OF THE ROTOR TO RUN

Details the necessary steps for preparing the rotor before operation, including cleaning.

5.2. LOADING

Explains the crucial aspects of loading samples and balancing the rotor correctly.

5.3. ROTOR INSTALLATION

Provides instructions on how to properly install the rotor onto the centrifuge drive.

SECTION 6 CLEANING AND PERIODIC MAINTENANCE

6.1. PERIODIC MAINTENANCE

Details the routine maintenance tasks required for the centrifuge.

6.2. STERILIZATION

Describes methods for sterilizing the centrifuge components.

6.3. CORROSION INFORMATION

Provides information regarding chemical and stress corrosion, their causes, and effects on the rotor.

6.5. CLEANING

Details the procedures for cleaning the centrifuge and its parts.

6.6. ELECTRICITY

Covers electrical safety aspects and precautions related to the centrifuge.

SECTION 7 DISPOSAL MANAGEMENT CONCEPT

SECTION 8 TROUBLESHOOTING

SECTION 9 ELECTRICAL CIRCUIT DIAGRAMS

9.1. ELECTRICAL CIRCUIT DIAGRAM OF NF 1200

Shows the detailed electrical circuit diagram for the NF 1200 centrifuge.

9.2. ELECTRICAL CIRCUIT DIAGRAM OF NF 1200R

Shows the detailed electrical circuit diagram for the NF 1200R centrifuge.

SECTION 10 WARNING LABEL

Related product manuals