Need help?Do you have a question about the Nuvo Concerto NV-I8GMS and is the answer not in the manual?
Overview of the configurator's startup screen and options for managing configuration files.
Managing IR codes, adding components, recording IR codes, and cleaning the IR library.
Procedure for assigning source components to the six available source inputs.
Creating macro definitions and preset strings for third-party source control.
Defining zone properties, including volume limits, lockout, and grouping.
Configuring system-wide settings like external mute, time display, and power-off modes.
Process for downloading configurations and updating Control Pad firmware.
Initial setup sequence for Control Pads when first plugged into the system.
General| Audio Channels | 8 |
|---|---|
| Zone Control | 8 Zones |
| Amplifier Class | Class D |
| Network Connectivity | Ethernet |
| Audio Outputs | 8 speaker outputs |
| Power per Zone | 50W @ 8 ohms |
| Total Harmonic Distortion (THD) | <0.05% |
| Signal-to-Noise Ratio (SNR) | >90dB |
| Frequency Response | 20Hz - 20kHz |
| Impedance | 8 ohms |
| Control | RS-232, IR |
To Next Page
