Need help?Do you have a question about the Nuvo Simplese NV-A4S and is the answer not in the manual?
Describes the POWER button, Stand By LED, and Zone Status LEDs on the amplifier's front panel.
Details audio inputs, speaker outputs, IR outputs, mute input, status output, network input, and AC connections.
Explains keypad inserts, volume indicator, volume button, zone on/off, source selection, all off, and RJ-45 connection.
Details the remote's IR emitter, device selector, numeric keypad, and control buttons.
Covers Cat-5 and speaker cable termination, wiring standards, and best practices.
Instructions for locating and installing the E-Z Port hub for keypad connections.
Details connecting the Simplese amplifier to the E-Z Port using a Cat-5 cable.
Explains how to connect audio sources using RCA cables to the amplifier inputs.
Describes connecting mini IR mouse emitters for controlling source equipment.
Guide to installing keypads and setting DIP switches for zone control.
Configures keypad zone addressing using DIP switches 1-4 for unique zone control.
Sets zone EQ presets (switches 5-7) and zone grouping (switch 8) via DIP switches.
Configures zone volume presets (switch 9) for power-off behavior using DIP switches.
Explains how to use the MUTE input for automation and the STATUS output for triggering external equipment.
Provides detailed technical specifications for power, preamplification, IR system, requirements, and physical dimensions.
To Next Page
General
