Need help?Do you have a question about the Nuvo Essentia NV-E6DXS and is the answer not in the manual?
Detailed guide for properly terminating Cat-5 network cables using the EIA/TIA 568A wiring standard.
Guidance on placing the main amplifier unit in the optimal location for audio source equipment.
Instructions for installing the EZ Port multi-connection hub for Cat-5 wiring from keypads.
Steps to connect the EZ Port to the Essentia amplifier using a network cable.
How to set unique zone addresses using DIP switches 1-4 on the keypad for amplifier identification.
General| Zone Control | 6 zones |
|---|---|
| Dimensions | 17" W x 3.4" H x 16.5" D (43.2 cm x 8.6 cm x 41.9 cm) |
| Weight | 24 lbs (10.9 kg) |
| Type | Multi-zone amplifier |
| Impedance | 4-8 ohms |
| Input Sensitivity | 200mV |
| Frequency Response | 20Hz - 20kHz |
| Total Harmonic Distortion | 0.05% |
| Power Output | 60 watts per channel |
| Audio Formats Supported | Analog audio |
| Network Connectivity | Bluetooth |
| Watts per channel | 60W |
| Signal-to-Noise Ratio | 95dB |
To Next Page
