Do you have a question about the Nuvo NV-P2100 and is the answer not in the manual?
voltage trigger | 3 to 30 Volts AC or DC |
---|---|
power output at 8 Ohms | 70 Watts |
power output at 4 Ohms | 100 Watts |
AC power | 120 VAC, 60 Hz |
unit on/off voltage | + 12 Volts DC 75 mA |
power consumption off | 6.8 Watts |
power consumption on no signal | 7.6 Watts |
power consumption 1/10 power | 29.2 Watts |
power consumption 1/3 power | 79.9 Watts |
power consumption full power | 405 Watts |
rated THD | <0.8% |
---|---|
frequency response | 20Hz to 20kHz at 1 Watt + 1db |
input sensitivity 0dB | 1 Volt rms |
input sensitivity +6dB | 2 Volts rms |
input sensitivity -12dB | .25 Volts rms |
input impedance | 22 kOhms |
unit size | 8.5W x 3.75H x 13.5L inches, 214W x 96H x 340L millimeters |
---|---|
unit weight | 12 pounds (4.54kg) |
shipping weight | 17.2 pounds (6.51kg) |