Please observe the following condition for the safety operation of KHKT001-EVM.
In case of module usage other than stated, any claims will be rendered void.
- In any case, it is not allowed to disassemble KHKT001-EVM or to make any changes to the hardware.
- Only the power supply provided by Thundercomm's 96-board is allowed to be used with the camera.
Do not use other power supply.
- KHKT001-EVM is not waterproof and dustproof. Do not use under rain.
- Do not apply any register settings and EEPROM values in KHKT001-EVM (especially laser emission settings)
- Handle with care for KHKT001-EVM or power supply connecter.
- Do not touch Diffuser or Lens.
- KHKT001-EVM uses VCSELs (laser diode technology). Before starting the ToF module, ensure by visual
inspection that VCSEL’s Diffuser has not fallen off OR do not have any cracks/breakage.
- KHKT001-EVM is not certified for any safety related applications.
Safety Instructions
18
To Next Page
Loading...
Need help?
General