NuWave Bravo XL - Page 22

instructions
22
INSTRUCTIONS
22
SEAR 1, SEAR 1 2, DELAY,
and WARM with STAGE
COOKING
Example: Delay for 1 hour »
adjust to 350F (177C) (Sear
1) for 4 min. » Cook at 325F
(165C) for 20 min. (Stage 1)
» Cook at 300F (150C) for 40
min. (Stage 2) » Cook at 350F
(177C) for 15 min. (Stage 3) »
Cook at 400F (204C) for 5 min.
(Sear 1 2) » WARM at 125F
(50C) for 30 min.
1. Press ON/OFF. Adjust
temperature to 325F (165C)
by turning START/PAUSE,
350F (177C) is the default.
2. Press TEMP/TIME. Adjust
time to 20 min. by turning
START/PAUSE.
3. Press PROG and
TOP/BTM at the same
time to set delay. Turn
START/PAUSE to adjust
time to 1 hour (“01:00”).
   







  



     
4. Press SEAR once. Turn
START/PAUSE to adjust
temperature to 350F
(177C). Press TEMP/TIME.
Turn START/PAUSE to
adjust time to 4 min. 1 will
be displayed.
5. Press STAGE. Turn
START/PAUSE to adjust
temperature to 300F (15C).
Press TEMP/TIME. Turn
START/PAUSE to adjust
time to 40 min.
6. Press STAGE again. Turn
START/PAUSE to adjust
temperature to 350F
(177C). Press TEMP/TIME.
Turn START/PAUSE to
adjust time to 10 min.
7. Press SEAR again. Turn
START/PAUSE to adjust
temperature to 400F
(204C). Press TEMP/TIME.
Turn START/PAUSE to
adjust time to 5 min., 2 will
flash.
8. Press WARM. Turn
START/PAUSE to adjust
warming temperature to
125F (50C). Press TEMP/
TIME. Turn START/PAUSE
to adjust warming time to
30 min.
9. Press START/PAUSE to
begin the cooking process.
Notes:
• During cooking, the Bravo
will display all functions
programmed for that
cooking cycle. The function
that the Bravo is currently
cooking in will flash.