10 | nuwavenow.com
OPERATING THE OXYPURE
AUTO
FAN
SPEED
HIGHLOW
Filter Functions
Air purifiers operate more efficiently when
all windows and doors are closed. The
OxyPure can purify the air in extra-large
rooms.
Stainless Steel Pre-Filter
Washable and reusable for up to 20
years. Captures and collects large particles
and allergens including pet hair, dander,
and pollen. Made from rust-free 18/8
stainless steel.
Bio-Guard
®
Filter 1 and 2:
Washable and reusable for up to 20
years. 8,000V, positive and negative
charges
capture particles as small as
0.1 microns, as well as smoke, pollen,
and allergens.
Ozone Emission Removal Filter
Reusable for up to 20 years. Not
washable. Eliminates ozone emissions and
other harmful airborne chemicals.
Power ON/OFF
1. Plug your OxyPure into an outlet.
The POWER button will be lit red for
standby mode.
2. Press POWER. The OxyPure will turn
on and the POWER button will be lit
green.
• Each bar around AIR and ODOR will
illuminate, this is measuring current
air quality while the fan is on.
3. Press POWER again to turn the
OxyPure off.
• When you select a different mode
other than the default AUTO before
turning off, the OxyPure will run the
previously selected mode when it is
powered back on.
ULTIMATE
CLEAN
AUTO
Allows your OxyPure to adjust the fan
speed automatically (No time limit, cannot
run with Fan Speed and Ultimate Clean).
1. Press AUTO. The AUTO light will be lit.
2. Press AUTO again to turn off function.
WIFI
Allows you to connect the OxyPure to your
Wi-Fi network.
1. Press and hold AUTO to initiate Wi-Fi
pairing function. See page 8 for details.
WIFI
ULTIMATE CLEAN
Allows your Oxypure to automatically adjust
to the highest fan speed based on your air
quality. (No time limit, cannot run with Auto).
1. Press ULTIMATE CLEAN. The
ULTIMATE CLEAN light will be lit
green.
2. Press ULTIMATE CLEAN again to turn
it off.
ECO MODE
ECO MODE
Allows you to save energy by keeping
the Oxypure fan off until it’s needed. The
POWER button will be lit yellow.
1. Press and hold ULTIMATE CLEAN
for 2 seconds to activate. The Power
icon backlight will be yellow while ECO
MODE is on.
2. Press and hold ULTIMATE CLEAN for
2 seconds again to deactivate ECO
MODE.
FAN SPEED
Allows you to adjust the Oxypure’s fan
speed to 6 different speeds (LOW to HIGH).
(Cannot run with Auto and Turbo).
1. Press FAN SPEED to adjust.
2. To go back to the lowest fan speed,
press FAN SPEED until the first green
bar is lit.
OPERATING BUTTONS
To Next Page
Loading...
