NuWave PRO iQ360 - Appendix One: Advanced Functions

44
nuwavenow.com
APPENDIX ONE: ADVANCED FUNCTIONS
appendix: advanced functions
Principle of Sear 1, Sear 1 & 2, Sear 2
• Sear 1: Is ALWAYS the function right BEFORE the regular
cooking stages.
• Sear 1 & 2: Is ALWAYS right BEFORE and right AFTER the
regular cooking stages.
• Sear 2: Is ALWAYS right AFTER the regular cooking stages.
Using the Sear 1 Function
1. Press Temp or Time to adjust the cooking temperature and time.
2. Press Sear once. The screen will show “450F”, “Sear”, “1”,
“00:05”, “Fan” and “Preheat”.
3. Press START/PAUSE. “Sear”, “1” and “:” will all ash.
• The Pro Smart Oven will preheat and then sear at 450F for
5-minutes before going into the regular cooking stage.
• Once the regular cooking stage has nished, the screen will
show “END” and the Pro Smart Oven will beep three (3) times.
4. To set the main cooking time or temperature after pressing Sear:
• Press and hold STAGE. The screen will show “Stage 1”,
“350F”, “00:15”. Even though the Pro Smart Oven is no
longer in Sear mode, it remembers that Sear 1 has been set.
Using the Sear 1 & 2 Function
1. Press Temp or Time to adjust the cooking temperature and time.
2. Press Sear twice. The screen will show “450F”, “Sear”, “1”,
“2”, “00:05”, “Fan” and “Preheat”.
3. Press START/PAUSE. While in Sear 1, “1” and “:” will all ash.
• The Pro Smart Oven will preheat and then sear at 450F for 5
minutes. It will then cook at the set temperature and time and
then sear again at 450F for 5 minutes.
• Once the Pro Smart Oven has nished cooking, it will display
“END” and beep three times.
4. To set the main cooking time or temperature after pressing Sear:
• Press and hold STAGE. The screen will show “Stage 1”,
“350F”, “00:15”. Even though the Pro Smart oven is no
longer in Sear mode, it remembers that Sear 1 & 2 has
been set.