Need help?Do you have a question about the nux JTC Pro NDL-5 and is the answer not in the manual?
General| Model | JTC Pro NDL-5 |
|---|---|
| Brand | Nux |
| Effects | Looper, Drum Machine |
| Loop Recording Time | 6 hours |
| Display | LCD |
| Power | 9V DC |
| True Bypass | Yes |
| Type | Looper Pedal |
| Drum Styles | 25 |
| Power Supply | 9V DC adapter (not included) |
| Inputs | 1 x 1/4" Instrument Input |
| Outputs | 2 x 1/4" |
| USB | 1 x Micro-B |
| Loop Memory | 256 loop tracks |
Covers avoiding rain/moisture, not removing screws, and referring servicing to qualified personnel.
Details FCC rules compliance for Class B digital devices and acceptable interference levels.
Explains the meaning of the lightning symbol (electrical caution) and exclamation point (caution).
Includes using correct power supply, avoiding heat, preventing liquid entry, and proper servicing procedures.
Covers unplugging when unused, protecting the cord, and safe listening practices to prevent hearing damage.
Describes the pedal's dual-switch design, recording capacity, memory, and separate loop/drum controls.
Lists core features like audio quality, recording time, memory, drum options, tempo, start/stop modes, one-shot, output modes, and USB.
Explains the screen display and the function of loop/rhythm LED indicators.
Details the function of Memory Select, Loop Level, Rhythm Level, and Tempo/Time Signature knobs and buttons.
Describes the Multi-functional Loop Footswitch and Rhythm Footswitch operations.
Standard loop recording process; press footswitch to begin recording.
Automatically starts recording upon detecting an input signal.
Stops the loop playback immediately.
Plays a backing track or loop once without repeating.
Allows the loop to finish its current cycle before stopping.
Gradually fades out the loop over 10 seconds before stopping.
How to save recorded tracks and delete stored presets.
Adjusting drum tempo and changing beat time signatures.
Controls for Loop Level and Rhythm Level volumes.
Detailed usage for Record/Play and Record/Dubbing modes, including hold functions.
Method for setting drum tempo by tapping the footswitch.
Controls for starting/stopping drums and adding drum fills.
Procedure for when the device memory is full and requires deletion.
Description of Input, Left Output (Amp), and Right Output (Mixer) jacks.
Details for External Footswitch Input, Micro B USB, and DC 9V Power Jack.
Describes the type and purpose of each audio input/output jack.
Details on External Footswitch Input, USB, and Power connections.
Steps to enter global settings mode and use Memory Select knob.
Options for alternate footswitch control and enabling frequency response compensation.
Choosing between three different output signal routing modes.
Step-by-step guide to perform a factory reset on the device.
Crucial warning about data loss and the need for backups before formatting.
Instructions for updating the JTC Pro's firmware via USB.
Guide for importing and exporting backing tracks using WAV files.
Specifies that only 24-bit, 44.1kHz WAV files are supported.
Information on obtaining free software for audio file conversion.
Visual representation of how the pedal connects to a guitar, amplifier, and mixer.
Details impedance, sampling rate, A/D conversion, frequency response, and dynamic range.
Information on power supply, current draw, physical size, and product weight.
Lists included items and a disclaimer about specification changes.
To Next Page
