nux Trident - User Manual

NUX Trident Firmware Update Guide
!
Recipe
Computer running either Windows 7 or later or MacOS 10.10 or later.
the NUX Trident.
USB-C data/sync cable (Included).
NUX ACD-006A Power Supply (Included).
Quality USB-C to USB adapter (If your computer only comes with USB-C ports.)
A little patience.
1
!
Step by Step Guide
0. Download the firmware update kit & Install the NUX Device Updater.
Download the firmware update kit from the NUX Trident product page.
Unzip the downloaded file to a directory of your choice.
Install the NUX Device Firmware Updater.
2
1. Connect the NUX Trident to your computer and put it into DFU mode.
Connect the Trident to your Mac or PC using the included USB-C cable.
3
Run "NUX Device Updater", you will see the following interface:

nux Trident Specifications

General

Brand	nux
Model	Trident
Category	Music Pedal
Language	English

Summary

Step by Step Guide

Download the firmware update kit & Install the NUX Device Updater

Details requirements and initial software setup for the firmware update process.

Connect the NUX Trident to your computer and put it into DFU mode

Instructions for connecting the NUX Trident to a computer and entering DFU mode.

Select the new firmware file(.bin) and start upgrading the firmware

Guide on selecting the correct firmware file and initiating the update procedure.

Finish Updating

Steps to complete the firmware update, including disconnecting and testing.