2. Upgrade the firmware of the BlueField DPU:
1. Upgrade the BlueField DPU's firmware:
Expected output example:
2. Power cycle the host for the changes to take effect.
3. Verify that the BFB has been installed and the firmware has been upgraded
successfully by accessing the DPU again:
1. SSH to the BlueField DPU from the host using OOB IP or RShim IP:
2. Check the versions of the DPU image and firmware:
INFO[BL2]: start
…
INFO[MISC]: Ubuntu installation started
INFO[MISC]: Installation finished
INFO[MISC]: Rebooting...
dpu# sudo /opt/mellanox/mlnx-fw-updater/mlnx_fw_updater.pl --force-
fw-update
Device #1:
----------
Device Type: BlueField-2
[...]
Versions: Current Available
FW <Old_FW_ver> <New_FW_ver>
[...]
Done
ssh <ip>
To Next Page
Loading...