Supported Interfaces
HHHL DPU Layout and Interface Information
Interfaces of MBF2M345A-HECOT, MBF2M345A-HECOT
Component Side Print Side
Ite
m
Interface Description
1 DPU DPU IC 8 cores
2
PCI Express
Interface
PCIe Gen 4.0 through an x16 edge connector
3
Networking
Interface
Network traffic is transmitted through the DPU QSFP56 connector.
The QSFP56 connectors allow for the use of modules, and optical
and passive cable interconnect solutions.
4
Networking
Ports LEDs
Interface
One bi-color LED per port for the link and physical status
5 DDR4 SDRAM
On-Board
8 units of SDRAM for a total of 16GB @ 3200MT/s single DDR4
channel, 64bit + 8bit ECC, solder-down memory
To Next Page
Loading...