Hardware Installation
Installation and initialization of the DPU require attention to the mechanical attributes,
power specification, and precautions for electronic equipment.
Safety Warnings
Please observe all safety warnings to avoid injury and prevent damage to system
components. Note that not all warnings are relevant to all models.
Note that not all warnings are relevant to all models.
General Installation Instructions
Read all installation instructions before connecting the equipment to the power
source.
Jewelry Removal Warning
Before you install or remove equipment that is connected to power lines,
remove jewelry such as bracelets, necklaces, rings, watches, and so on. Metal
objects heat up when connected to power and ground and can meltdown,
causing serious burns and/or welding the metal object to the terminals.
Over-temperature
This equipment should not be operated in an area with an ambient
temperature exceed ing the maximum recommended: 55°C (131°F). An airflow
of 200LFM at this maximum ambient temperature is required for HCA cards
Note
Safety warnings are provided here in the English language.
To Next Page
Loading...