DPU Board Label (Example)
Warning
The HOST MAC in the below board label is the product's base MAC.In
dual-port cards, the HOST MAC belongs to the first port, and the
HOST MAC of the second port increases by 1 (in HEX).For
example:The HOST MAC address of the second port is HOST: 00 02
C9 27 05 01.
Warning
The allocation of MAC addresses to the embedded CPU are derived
from a few configuration factors which set some variables.
The gap between the MAC addresses is a set by constant numbers in
HEX.The OOB, ECPF, and MPF MAC addresses depend on the BASE
MAC address.
To Next Page
Loading...