Nvidia GeForce 2 GTS - User Manual

Questions and Answers

D
Daniel ParkAug 19, 2025
What to do if my Nvidia Video Card monitor display flickers after Windows 95/98 starts?
- T
  Timothy GutierrezAug 19, 2025
  If your monitor display flickers after Windows 95 or Windows 98 starts, it might be due to your monitor not supporting the current resolution or refresh rate. To resolve this, restart your system in Safe mode by pressing F8 when the message "Starting Windows 95/98…" appears, and then select Safe Mode. Once in Safe Mode, lower your monitor's resolution. Consult your monitor's manual for the resolutions it supports.
A
Angela HarrisAug 26, 2025
How to fix incorrect display settings after Nvidia GeForce 2 GTS Video Card installation in Windows 95?
- F
  Frank ParksAug 26, 2025
  If Windows 95 informs you that display settings are still incorrect after installing your Nvidia Video Card and restarting, it's likely due to an incomplete removal of a previous display driver. Here’s how to resolve it: 1. Right-click the "My Computer" icon on your desktop. 2. Select "Properties" to open the "System Properties" box. 3. Click on the "Device Manager" tab. 4. Open "Display Adapters" by double-clicking it. 5. Remove all conflicting adapters by selecting them and clicking "Remove." 6. Close Device Manager and restart Windows 95. Now, your display driver should work correctly.
C
Catherine HillSep 2, 2025
Why is my Nvidia GeForce 2 GTS beeping during system startup?
- M
  Mallory DanielSep 2, 2025
  If your system emits a series of prolonged beeps when starting up, it could indicate that your Nvidia Video Card is not properly inserted into the expansion slot. To fix this, ensure that the gold-striped bus connector of the graphics card is fully and evenly inserted into the expansion slot. You can try gently pressing the card into the slot or removing and re-inserting it.
S
Sarah BlevinsNov 10, 2025
What to do if Nvidia Video Card driver doesn't work after installing in Windows 95?
- S
  Samuel HortonNov 10, 2025
  If, after installing the driver for your Nvidia Video Card, Windows 95 does not prompt you to restart and the driver still isn't working after you manually reboot, it may be because you have installed similar drivers before. To fix this: 1. Right-click the "My Computer" icon on your desktop. 2. Select "Properties" to open the "System Properties" box. 3. Go to the "Device Manager" tab. 4. Check if "Display adapters" is listed and click it. If not, skip to step 9. 5. Double-click on your card's name. 6. In the properties box, select the "Driver" tab. 7. Click "Update Driver.." and follow the installation steps. 8. If "Display adapters" isn't listed, click "Other devices" to find your card. 9. Select the "Driver" tab in the properties box, then click "Change Driver.." and follow th...