19
Problem: After installation and restarting, Windows 95 informs me that display
settings are still incorrect. There may be conflict between previous and current
display drivers. This is caused by incomplete removal of previous display driver.
Try the following steps to remove it.
Solution:
(1) Use the right mouse button to click on the "My Computer" icon on your desktop.
(2) Select "Properties" and the "System Properties" box should appear.
(3) Click on the "Device Manager" tab.
(4) You will see a list of devices on your computer.
(5) Open "Display Adapters" in the list by double clicking it.
(6) You will find two (or more) conflicting adapters listed here.
(7) Remove all previous adapters by selecting them and selecting "Remove"
(8) Close Device Manager and restart Windows 95.
(9) Now your display driver should work correctly.
Problem: After installing the driver, Windows 95 doesn't prompt me to restart and
the driver still doesn't work after a manual reboot. You may have installed similar
drivers before. Try the following steps to install:
Solution:
(1) Use right mouse button to click on the "My Computer" icon on your desktop.
(2) Select "Properties" and the "System Properties" box appears.
(3) Click on the "Device Manager" tab.
(4) You will see a list of devices on your computer.
(5) If "Display adapters" appears in the list, click it.
If "Display adapters" doesn't appear, skip to step 9 and continue.
(6) The name of your card will be listed in the box. Double click it.
(7) The properties box of your card appears. Select "Driver" tab.
(8) Click "Update Driver.." and follow the installation steps.
(9) Click "Other devices" and you will see your card listed.
(10) Click on the card, and when the properties box appears.
Select the "Driver" tab.
(11) Click "Change Driver.." and follow the installation steps.
Chapter 7 Trouble Shooting
To Next Page
Loading...
Need help?
General
