Video Input & Video Output
You can use the S-Video connector to send and receive video signals to and
from video devices that use standard AV cables such as video cam recorders
or DVD players. However, you must use the VIVO adapter which is supplied
in the box when your card supports video input / video output functionality.
At one end of this adapter is the S-Video connector that you attach to the
card. The other end will have up to 4 connectors which may include one or
all of the following connectors: S-Video-In, S-Video-Out, Video-In (AV) and
Video-Out (AV). Attach AV video devices to either the video-in connector or
video-out connector depending on your needs.
Note: In order to use the Video-In functionality, you must have installed the
WDM drivers (for VIVO use) from the Setup CD-ROM (see software installa-
tion section). Then you need to install a video editing program which sup-
ports WDM, to display video data received on your Video-In port. If you are
only using Video out functionality, you do not need to install the drivers. Also
note that you must use the audio connectors on the mainboard to transmit
audio signals.
To Next Page
Loading...
