CONFIGURING SLI
> Windows Vista
z
Classic view
Go to Start
Control Panel and select the NVIDIA Control
Panel icon.
z
Control Panel Home view
Go to Start
Control Panel Additional Options and select
the NVIDIA Control Panel icon.
Enabling SLI
2 Once you have the NVIDIA Control Panel open, click on
Set SLI and PhysX configuration in the left task pane.
3 Select from the following multi-GPU configurations:
> Do not use SLI
Select this mode when you want to drive displays on each GPU.
> Enable Quad SLI (recommended)
Select this mode when you want your graphics cards to work to-
gether to increase your rendering performance and image quality.
4 Click Apply, then Yes on the Applications Shutdown Required window.
To Next Page
Loading...
