Nvidia GeForce GTX 760 User Manual


HARDWARE INSTALLATION
HARDWARE INSTALLATION
Installing the NVIDIA GeForce GTX 760 graphics
card hardware involves opening up your
computer. Follow all of the safety instructions
provided here to ensure that there is no damage
to you, your computer, or the graphics board.
Safety Instructions
To reduce the risk of fire, electric shock, or injury, always follow basic
safety precautions.
Note: All hardware must be installed prior to installation of
the drivers.
> Remove power from your computer by disconnecting the AC main
source before installation.
> Do not operate this product near water or when your hands or
body are wet.
> Do not place this product on soft surfaces that could block the
ventilation slots and cause overheating.
> Do not place this product near a heating register or radiator.
> Place this product securely on a stable surface. Serious damage
to this product may result if it falls.
> Do not allow anything to rest on the power cord. Do not place
this product where a person can step or trip on the power cord.


Nvidia GeForce GTX 760 Specifications

General

CUDA Cores	1152
Base Clock	980 MHz
Boost Clock	1033 MHz
Memory Speed	6.0 Gbps
Memory Interface	256-bit
Memory Bandwidth	192.2 GB/s
VRAM	2 GB GDDR5
TDP	170 W
Power Connectors	2 x 6-pin
Recommended System Power	500 W
Architecture	Kepler
GPU	GK104
Texture Units	96
ROPs	32
OpenCL	1.2
Bus Interface	PCIe 3.0 x16
OpenGL Support	4.6
Maximum Digital Resolution	4096x2160
Maximum Display Outputs	4