NVX BDA7501 - Level and LPF Control; Installation; Professional Installation Recommendation

3
NVX AMPLIFIER
INSTALLATION
LEVEL CONTROL
•
NOT a volume or a power limiting control
• Makes the amp more sensitive to input from the stereo
•
With the gain up the amp will reach full output at a
lower volume
•
Try to run the gain at the lowest setting possible for
your system
LPF CONTROL
• Removes unwanted frequencies from a subwoofer
or amplifier
•
Tweeters can easily be destroyed by bass notes,
subwoofers won’t sound natural if it is playing
midrange notes
•
Requires careful adjustment to ensure that you are left
with no holes in your frequency response range
Professional installation by an authorized NVX dealer is
highly recommended! Otherwise, the performance of your
new amplier may not be satisfactory. In the event that you
decide to do your own installation, please read and follow
this manual carefully. Failure to do so may compromise the
integrity of the amplier, your automobile and potentially
void the product warranty.
Ampliers are generally mounted in the hatch/trunk area
of a car or SUV and under or behind the seat of most
pickup trucks. Select a location that will provide adequate
ventilation for the amplier. Avoid mounting the amplier
with the ns facing down. The ns should be facing up,
either vertically or horizontally. Secure the amplier with
the screws provided.
Before securing the amplier, inspect the mounting
location carefully to ensure that you do not drill into or
damage any electrical, hydraulic, uid, or fuel lines.
Know your total ohm load before you make
any connection
FEATURES CONT.