What to do if NVX Amplifier power LED is on, but there is no output from speakers?
If the power LED is illuminated, but you aren't getting any sound from your speakers, verify that the RCA or High-Level Speaker connections are properly connected, ensuring the amplifier is receiving a signal. Also, check the gain setting on the amplifier and the volume level on your source unit.
How to fix NVX Amplifier if power LED is not lit when source is turned on?
If the power LED on your NVX amplifier isn't lighting up when the source is turned on: * Verify the remote turn-on wire has sufficient voltage. * Ensure the power (+12V), ground (Gnd), and remote (Rem) connections are secure. * Check both the amplifier fuse and the in-line fuse. * Confirm the power wire has sufficient voltage.
General| Channels | 4 |
|---|---|
| RMS Power @ 4 Ohms | 100W x 4 |
| RMS Power @ 2 Ohms | 150W x 4 |
| Bridged RMS Power @ 4 Ohms | 300W x 2 |
| Minimum Impedance Unbridged | 2 Ohms |
| Minimum Impedance Bridged | 4 Ohms |
| THD at Rated RMS Power | <0.05% |
| Input Sensitivity | 200mV - 6V |
| Crossover Slope | 12 dB/octave |
| Bass Boost | 0-12dB |
| Bass Boost Frequency | 45 Hz |
| Fuse Rating | 30 A |
| Crossover | Variable |
Expresses gratitude for purchasing the NVX MVP Series amplifiers.
Details for MVPA1 and MVPA4 models including power, frequency, and dimensions.
Lists key features for MVPA1 and MVPA4, like Class-D circuitry and protection indicators.
Provides essential safety instructions for using and installing the amplifier.
Guidance on selecting a suitable location and securely mounting the amplifier.
Instructions for making secure power and ground connections using proper gauge wire.
Details on connecting power, remote, and signal inputs (RCA/speaker).
Guidance on connecting speakers and subwoofers to the amplifier outputs.
How to adjust the gain to match amplifier input sensitivity to the source unit.
Explanation of Bass Boost settings and input selection modes (2-ch, 4-ch, 3-ch).
How to set LPF and HPF to filter specific frequency ranges.
Adjusting phase to synchronize sound from all speakers for optimal listening.
Solutions for common amplifier problems like no output, noise, or distorted output.
Explains the terms, conditions, and limitations of the NVX product warranty.
Instructions on how to return defective products for warranty service or repair.
To Next Page
