NVX MVPA1 User Manual

3
NVX MVP
SAFETY INFORMATION
INSTALLATION
● Please read and understand all instructions before attempting to use or install the amplier. Damage caused by misuse is not covered under warranty.
● This unit is designed for use with 12VDC systems with negative ground only.
● Use only the supplied mounting hardware for a safe and secure installation.
● Adjust the volume to a safe and comfortable level when operating the motor vehicle.
● Never pour liquids on or near the amplier, or place the product into a wet/moist environment. If liquid accidentally comes in contact with the
amplier, disconnect all power and ground connections immediately.
● Clean the unit with a soft, dry cloth only. Never use chemicals or solvents such as alcohol or household cleaner.
STEP 1: MOUNTING THE AMPLIFIER
To ensure optimal performance and maximum longevity, the amplier
should be mounted so there is suitable ventilation.
Ideal locations include under the seat, in the trunk, or any other location
which provides adequate air space to keep amplier cool. Due to the
potential temperature of the heat sink, it is recommended that you do
not mount the amp directly to fabric or vinyl material.
Once you’ve found a suitable location that provides ventilation and will
keep the amplier dry , mount the amplier using the included mounting
tabs. Make sure the amplier is mounted securely.
STEP 2: MAKING POWER & GROUND CONNECTION
Be sure to use proper gauge wire for all power/ground connections. A
minimum 10 gauge wire is recommended. For the best results, using an
NVX amplier installation kit is recommended.
GROUND: Prepare the chassis ground by clearing any paint, dirt and
grease from the metal surface. Connect a “ground” wire directly to the
chassis of the vehicle within 30 inches of the amplier using a non-
anodized screw and a star washer , and connect the other end to the
ground terminal. The ground should be kept as short as possible, and
should never exceed 30 inches.
Ideal Locations
Install where there
is ventilation
to keep amp cool
Ground

NVX MVPA1 Specifications

General

Brand	NVX
Model	MVPA1
Category	Amplifier
Language	English